1. Position the Ledsreact Pro on the surface 

2. Position the Ledsreact Pro

1. With figure 1 indicated towards the starting point for single player mode
   
2. With figure 1 and 3 indicated towards the starting point for the multiplayer mode
   

3. Position the cones (video below is the most easy way)

1. Set up a point 3M or 10ft measured from the Ledsreact Pro as set up baseline
   
2. Measure from that baseline 1M or 1Y to the left to position a red cone 
   
3. Measure from that baseline 1M or 1Y to the right to position a green cone
   
4. Measure from the red cone 2M or 2Y to position the Yellow cone and create this way the left back position
   
5. Measure from the green cone 2M or 2Y to position the blue cone and create this way the right back position
   
6. This way you will create a square with the color red on the position front left,  green on the position front right,  blue on the position right back and yellow on the position left back. 

4. Video how to set up the agility box test in single player mode

5. Video how to set up the agility box test in multi player mode